DEFU 368A Vertical Car Household Cu-t-ting Machine Multifunction Tool USA 110V

Description

DEFU 368A Vertical Car Household Cu-t-ting Machine Multifunction Tool USA 110V
📚
TOP 4 Reasons to Get 368A:
1. Multi functional practical machine, equipped with horizontal feeding movable handle
2. Multifunctional steel fixture, can copy various hollowness type,wave type,cylindrical key and key for multi lo-c-k and composite bead keys and some car keys,such as
For
BMW,
For
HONDA,
For
Vo-lks-wagen car keys
3. Fixture with dark duplication service pitch line and cylinder type key assembly function (multifunctional clamp)
4. With hardened ball bearing slide mechanism.
📃
368A Copy Cutting Machine Parameters:
Power:                        220V/50hz
Dimension size:       30 *21*35cm
Weight:                       10kg (Volume weight)
Voltage:                      110V~220V
Frequency:                 50/60Hz
Plug Type:                  UK.USA.BR.CN.EU
📦
Packing list:
1pc x 368A Cu-tt-ing Machine
📍
How to Operate 368A Copy Cu-tti-ng Machine ?
The change of the cutter and leading needle:
1.Use inner hexagonal wrench to unclamp the regular screw anticl-o-ckwise direction.
2.Draw out the cutter and the lead needle downward,separate them from axis.
3.Insert the new cutter and leading needle in the axis,when suitable for in its flexble position(Fig.1),fix the screw to l-oc-k in c-lo-ckwise
direction with inner hexagonal wrench.
❗
❗
Note:
Cutter and lead needle must the same angle(hole type cut) or the same diameter(wave type cut), otherwise it is inaccureate to duplicate.
1. Pack original spoon and spoon base into jig group dupicate cylinder spoon spend synchronizer of the hole separately(Fig.6)
2. Pull spoon pressing device separately,pull the head outwards and keep it aim at spoon handle,then let it go.The installation is finished.
3. Rotate the synchronus turn knob with handspress the vertical giving handle slowly,make it aim at the original key hole,l-o-ck the regular
knob of the slide,then can  get into the first listen of holing.
4. After finishing the first line of holes bores and pares move the synchronous turn knob,get into and pare the second line of holes after
aiming at repeat above-me ntioned steps and finish boring other holes.
🔧
The cannelure reaming boring and paring
As the concave nest of the key is grater than leading needle or boring and paring the oval concave nest,
it need to carry on reaming and bore paring at this moment,when reaming is pared,the cross slide should
move slowly in the counterclo-ckwise c-loc-k direction(Fig.7),If the direction of the cross slide is wrong,
it may easily to have damaged cutter.
🔑
The cuts of the wave type cannelure:
1.Install the leading needle,and lo-c-k the regular srews.(Fig.1)
2.Move the verical depth buttons in cl-oc-kwise direction(consults Fig.2) till the spring is totally compressed.
3.Fetch a name card(thick about 0.2) and put it on the surface of the jig under the leading needle.
4.Put the cutter into axis hole,hen press the vertical giveing handle slowly,make the name card happen to be
pressed during leading needle and jig.
5.Pull down cutter gently,make terminal surface of the cutter and jig surface contact ench other (Fig.8),
then l-oc-k cutter's regular screw along the direction of the c-lo-ck.
6. Put the original key into the jig and l-oc-k the rotary handle of the jig.
7. Place one corner of name card on the cut part of original,then press down vertical giveing handles slowly,
press one corne of name card on the cut part of leading needle and original spoon,then lo-c-k the vertical
depth of regular screw along the direction of the cl-oc-k,at this moment the vertical moving is totally dispelled(Fig.9)
8. Pack the jig into the base of the spoon,and move the handle of the jig,fasten it.
9. Starting the motor,move the cross slide moves in the wrong direction,It will damage the cutter.